G-120 offers a powerful solution for protecting all glass and ceramic surfaces. This ceramic and glass coating creates a water, oil and dirt repellent effect that makes maintenance much easier. By reducing dirt adhesion by up to 70 %, it reduces the need to use aggressive cleaning agents, preserving sensitive surfaces.<\/p>\n
This \"Easy-to-clean\" coating also makes it easy to remove stubborn stains, such as limescale and grime, with just a damp microfibre. This saves you time and effort, which in turn lowers cleaning costs.<\/p>\n
For optimum care, you can use mild, non-abrasive cleaning agents if necessary. G-120 can be applied to all glass and ceramic surfaces, such as shower enclosures, tiles and ceramic sinks, as well as car windscreens and solar panels.<\/p>\n
By using this ceramic and glass coating, you can ensure long-lasting protection and an impeccable appearance for your most exposed surfaces.<\/p>\n
Coverage: +\/- 200 m\u00b2\/litre or 50 m\u00b2\/250 ml<\/p>\n
Do not apply to hot surfaces or in direct sunlight!<\/strong><\/p>\n Preparation \/ Cleaning<\/strong><\/span><\/p>\n Step 1:<\/u>\u00a0Clean the surface using an alkaline product (such as Eco Wash) to remove organic stains (grease, mould, etc.).<\/p>\n Step 2:<\/u> Then clean the surface using an acid product (Alpha type) to remove mineral stains (lime, salt, etc.).<\/p>\n Step 3:<\/u>\u00a0Finally, before applying the protective coating, start by wiping the surface with a clean microfibre and a little ethanol. Next, make sure the surface is completely clean, dry and free from any traces of grease.<\/p>\n Before applying the coating, it is also essential to remove any remaining dirt or contamination. For heavily contaminated surfaces, a light polish is recommended to achieve optimum cleanliness.<\/p>\n <\/p>\n \u00a0Coating application<\/span><\/p>\n Shake the bottle before use!<\/strong><\/p>\n Spray G-120 evenly over the surface, using approximately 10 ml per m\u00b2. Immediately spread the product with a clean, dry suedecloth to ensure perfect coverage. A light mist should appear, indicating correct application.<\/p>\n Then carefully wipe off any residue until the surface is completely free of marks or streaks. After application, do not touch the surface for at least 2 hours to allow the product to take effect.<\/p>\n The coating takes around 48 hours to harden completely. In the meantime, avoid cleaning the surface to preserve the effectiveness of the coating.<\/p>\n \u00a0<\/b><\/p>","protected":false},"excerpt":{"rendered":" Rev\u00eatement de protection pour le verre et la c\u00e9ramique<\/p>\n<\/div>\n