G-120 offers a powerful solution for protecting all glass and ceramic surfaces. This ceramic and glass coating creates a water, oil and dirt repellent effect that makes maintenance much easier. By reducing dirt adhesion by up to 70 %, it reduces the need to use aggressive cleaning agents, preserving sensitive surfaces.
This "Easy-to-clean" coating also makes it easy to remove stubborn stains, such as limescale and grime, with just a damp microfibre. This saves you time and effort, which in turn lowers cleaning costs.
For optimum care, you can use mild, non-abrasive cleaning agents if necessary. G-120 can be applied to all glass and ceramic surfaces, such as shower enclosures, tiles and ceramic sinks, as well as car windscreens and solar panels.
By using this ceramic and glass coating, you can ensure long-lasting protection and an impeccable appearance for your most exposed surfaces.
Coverage: +/- 200 m²/litre or 50 m²/250 ml
Instructions for use:
Do not apply to hot surfaces or in direct sunlight!
- Preparation / Cleaning
Stage 1: Clean the surface using an alkaline product (such as Eco Wash) to remove organic stains (grease, mould, etc.).
Stage 2: Then clean the surface using an acid product (Alpha type) to remove mineral stains (lime, salt, etc.).
Stage 3: Finally, before applying the protective coating, start by wiping the surface with a clean microfibre and a little ethanol. Next, make sure the surface is completely clean, dry and free from any traces of grease.
Before applying the coating, it is also essential to remove any remaining dirt or contamination. For heavily contaminated surfaces, a light polish is recommended to achieve optimum cleanliness.
2.coating application
Shake the bottle before use!
Spray G-120 evenly over the surface, using approximately 10 ml per m². Immediately spread the product with a clean, dry suedecloth to ensure perfect coverage. A light mist should appear, indicating correct application.
Then carefully wipe off any residue until the surface is completely free of marks or streaks. After application, do not touch the surface for at least 2 hours to allow the product to take effect.
The coating takes around 48 hours to harden completely. In the meantime, avoid cleaning the surface to preserve the effectiveness of the coating.
Weight | 1 kg |
---|---|
Volume | 100 ml, 250 ml |