Environmentally-friendly teak cleaner!

This versatile, powerful and environmentally-friendly cleaning product will help you with a variety of cleaning tasks. In particular as a phase 1 teak cleaner, but also as a super-powerful cleaning soap specifically for extreme contamination. 

Made from plant-based raw materials, the product is easily biodegradable and Ecolabel certified. It also meets the criteria and requirements of the international MARPOL convention. 

Developed for use as phase 1 for cleaning teak, the product effectively removes organic stains by penetrating deep into the wood. The product's powerful cleaning action darkens the colour of the wood, which is why it should be used in synergy with Infinite n°2, which acts as a brightener.

Thanks to its high pH (13.5 undiluted), it offers powerful degreasing properties. This makes it the ideal product for cleaning extreme soiling such as bilges, extremely contaminated hulls and decks, water lines (on boats or swimming pools) and any other type of cleaning requiring an alkaline product. 

Ultra concentrated, the product requires less water in the manufacturing process and is easier to store. It's a wise choice for boaters concerned about conserving resources. By choosing these products, you're not only saving money by buying fewer products, you're preventing the over-consumption of plastic, you're conserving space on your boat, but above all, you're saving the marine life that inhabits these waters.

Instructions for use: 

1st stage: dilution

Cleaning teak ⬇️

1. Start by shaking the container well to distribute the surfactants evenly.
2. In a bucket, dilute to a maximum of 25% with water and mix gently.

Other cleaning ⬇️

1. Start by shaking the container well to distribute the surfactants evenly.
2. In a bucket, dilute between 10 and 20% with water and mix gently.

Depending on the dilution you use, 1 litre of concentrated product is equivalent to between 5 and 10 litres of finished product.

2 nd stage: cleaning

Cleaning teak ⬇️

1. Wet the surface to be cleaned.
2. Apply the solution and leave for 1 to 2 minutes, then rub vigorously with a pad or hard brush without letting it dry.
3. Rinse thoroughly to remove excess product.

Other uses ⬇️

1. Wet the surface to be cleaned. 
2. Apply the solution to a glove or broom and rub vigorously. 
3. Rinse thoroughly 

Expert advice: 

Depending on the type of cleaning you are doing, it may not be necessary to dilute the product. For example, if the teak or other surface you want to clean is extremely contaminated, you can use the product undiluted, making sure you test a small area first.